Cisco IE-3000-8TC - Page 852

Index
IN-20
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
monitoring (continued)
SFP status 13-19, 39-8
speed and duplex mode 13-14
traffic flowing among switches 31-1
traffic suppression 26-19
VLANs 15-13
VMPS 15-28
VTP 16-16
mrouter Port 22-3
mrouter port 22-5
MSTP
boundary ports
configuration guidelines 19-15
described 19-6
BPDU filtering
described 20-3
enabling 20-12
BPDU guard
described 20-2
enabling 20-11
CIST, described 19-3
CIST regional root 19-3
CIST root 19-5
configuration guidelines 19-14, 20-10
configuring
forward-delay time 19-23
hello time 19-22
link type for rapid convergence 19-24
maximum aging time 19-23
maximum hop count 19-24
MST region 19-15
neighbor type 19-25
path cost 19-20
port priority 19-19
root switch 19-17
secondary root switch 19-18
switch priority 19-21
MSTP (continued)
CST
defined 19-3
operations between regions 19-3
default configuration 19-14
default optional feature configuration 20-9
displaying status 19-26
enabling the mode 19-15
EtherChannel guard
described 20-7
enabling 20-14
extended system ID
effects on root switch 19-17
effects on secondary root switch 19-18
unexpected behavior 19-17
IEEE 802.1s
implementation 19-6
port role naming change 19-6
terminology 19-5
instances supported 18-9
interface state, blocking to forwarding 20-2
interoperability and compatibility among
modes
18-10
interoperability with IEEE 802.1D
described 19-8
restarting migration process 19-25
IST
defined 19-2
master 19-3
operations within a region 19-3
loop guard
described 20-9
enabling 20-15
mapping VLANs to MST instance 19-16