Cisco IE-3000-8TC

Index
IN-23
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
passwords
default configuration 11-2
disabling recovery of 11-5
encrypting 11-3
for security 1-8
in clusters 7-12
overview 11-1
recovery of 39-3
setting
enable 11-3
enable secret 11-3
Telnet 11-6
with usernames 11-6
VTP domain 16-8
path cost
MSTP 19-20
STP 18-18
PC (passive command switch) 7-9
performance, network design 1-13
performance features 1-3
persistent self-signed certificate 11-38
per-user ACLs and Filter-Ids 12-8
per-VLAN spanning-tree plus
See PVST+
physical ports 13-2
PIM-DVMRP, as snooping method 25-8
ping
character output description 39-9
executing 39-9
overview 39-9
policed-DSCP map for QoS 36-53
policers
configuring
for each matched traffic class 36-44
for more than one traffic class 36-48
described 36-4
displaying 36-68
number of 36-31
types of 36-8
policing
described 36-4
token-bucket algorithm 36-9
policy maps for QoS
characteristics of 36-44
described 36-7
displaying 36-69
nonhierarchical on physical ports
described 36-8
port ACLs, described 34-2
Port Aggregation Protocol
See EtherChannel
port-based authentication
accounting 12-12
authentication server
defined 12-2
RADIUS server 12-3
client, defined 12-2
configuration guidelines 12-28
configuring
802.1x authentication 12-32
guest VLAN 12-42
host mode 12-35
inaccessible authentication bypass 12-45
manual re-authentication of a client 12-38
periodic re-authentication 12-37
quiet period 12-38
RADIUS server 12-35
RADIUS server parameters on the switch 12-34
restricted VLAN 12-43
switch-to-client frame-retransmission
number
12-39, 12-40
switch-to-client retransmission time 12-39
violation modes 12-32
default configuration 12-27
described 12-1
device roles 12-2
displaying statistics 12-59