Cisco IE-3000-8TC

Index
IN-25
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
ports (continued)
dynamic access 15-3
protected 26-6
REP 21-6
secure 26-8
static-access 15-3, 15-10
switch 13-2
trunks 15-3, 15-14
VLAN assignments 15-10
port security
aging 26-17
and QoS trusted boundary 36-35
configuring 26-12
default configuration 26-11
described 26-8
displaying 26-19
on trunk ports 26-14
sticky learning 26-9
violations 26-10
with other features 26-11
port-shutdown response, VMPS 15-24
port status monitoring alarms
FCS bit error rate alarm 3-3
link fault alarm 3-3
port not forwarding alarm 3-3
port not operating alarm 3-3
port VLAN ID TLV 27-2
power management TLV 27-2, 27-7
power supply alarm, configuring 3-5
Precision Time Protocol
See PTP
preempt delay time, REP 21-5
preemption, default configuration 22-8
preemption delay, default configuration 22-8
preferential treatment of traffic
See QoS
preventing unauthorized access 11-1
primary edge port, REP 21-4
primary links 22-2
priority
overriding CoS 17-6
trusting CoS 17-6
private VLAN edge ports
See protected ports
privileged EXEC mode 2-2
privilege levels
changing the default for lines 11-9
command switch 7-14
exiting 11-9
logging into 11-9
mapping on member switches 7-14
overview 11-2, 11-7
setting a command with 11-8
protected ports 1-8, 26-6
proxy reports 22-3
pruning, VTP
disabling
in VTP domain 16-14
on a port 15-19
enabling
in VTP domain 16-14
on a port 15-19
examples 16-5
overview 16-4
pruning-eligible list
changing 15-19
for VTP pruning 16-4
VLANs 16-14
PTP 9-1
configuring 9-3
default configuration 9-2
displaying configuration 9-4
PVST+
described 18-9
IEEE 802.1Q trunking interoperability 18-10
instances supported 18-9