Cisco IE-3000-8TC - Page 864

Index
IN-32
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
SNMP (continued)
informs
and trap keyword 33-11
described 33-5
differences from traps 33-5
disabling 33-15
enabling 33-15
limiting access by TFTP servers 33-16
limiting system log messages to NMS 32-10
manager functions 1-4, 33-3
managing clusters with 7-14
MIBs
location of A-3
supported A-1
notifications 33-5
overview 33-1, 33-4
security levels 33-3
setting CPU threshold notification 33-15
status, displaying 33-18
system contact and location 33-16
trap manager, configuring 33-13
traps
described 33-3, 33-5
differences from informs 33-5
disabling 33-15
enabling 33-11
enabling MAC address notification 8-21
overview 33-1, 33-4
types of 33-11
users 33-6, 33-9
versions supported 33-2
SNMP and Syslog Over IPv6 37-5
SNMP traps
REP 21-13
SNMPv1 33-2
SNMPv2C 33-2
SNMPv3 33-2
snooping, IGMP 25-1
software images
location in flash B-24
recovery procedures 39-2
scheduling reloads 4-20
tar file format, described B-24
See also downloading and uploading
source addresses
in IPv4 ACLs 34-9
source-and-destination-IP address based forwarding,
EtherChannel
38-7
source-and-destination MAC address forwarding,
EtherChannel
38-7
source-IP address based forwarding, EtherChannel 38-7
source-MAC address forwarding, EtherChannel 38-7
SPAN
configuration guidelines 30-10
default configuration 30-9
destination ports 30-6
displaying status 30-23
interaction with other features 30-8
monitored ports 30-5
monitoring ports 30-6
overview 1-10, 30-1
ports, restrictions 26-12
received traffic 30-4
sessions
configuring ingress forwarding 30-14, 30-21
creating 30-10
defined 30-3
limiting source traffic to specific VLANs 30-15
removing destination (monitoring) ports 30-12
specifying monitored ports 30-10
with ingress traffic enabled 30-13
source ports 30-5
transmitted traffic 30-5
VLAN-based 30-6
spanning tree and native VLANs 15-15
Spanning Tree Protocol
See STP