Cisco IE-3000-8TC - Page 871

Index
IN-39
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
VLAN database
and startup configuration file 15-7
and VTP 16-1
VLAN configuration saved in 15-6
VLANs saved in 15-4
vlan database command 15-6
VLAN filtering and SPAN 30-6
vlan global configuration command 15-6
VLAN ID, discovering 8-27
VLAN load balancing
REP 21-4
VLAN load balancing, triggering 21-5
VLAN load balancing on flex links 22-2
configuration guidelines 22-8
VLAN management domain 16-2
VLAN Management Policy Server
See VMPS
VLAN membership
confirming 15-27
modes 15-3
VLAN Query Protocol
See VQP
VLANs
adding 15-8
adding to VLAN database 15-8
aging dynamic addresses 18-9
allowed on trunk 15-18
and spanning-tree instances 15-2, 15-6, 15-12
configuration guidelines, extended-range
VLANs
15-12
configuration guidelines, normal-range VLANs 15-5
configuration options 15-6
configuring 15-1
configuring IDs 1006 to 4094 15-12
creating in config-vlan mode 15-8
creating in VLAN configuration mode 15-9
default configuration 15-7
deleting 15-9
described 13-2, 15-1
VLANs (continued)
displaying 15-13
extended-range 15-1, 15-11
features 1-7
illustrated 15-2
limiting source traffic with RSPAN 30-22
limiting source traffic with SPAN 30-15
modifying 15-8
multicast 25-16
native, configuring 15-19
normal-range 15-1, 15-4
number supported 1-7
parameters 15-4
port membership modes 15-3
static-access ports 15-10
STP and IEEE 802.1Q trunks 18-10
supported 15-2
Token Ring 15-5
traffic between 15-2
VTP modes 16-3
VLAN Trunking Protocol
See VTP
VLAN trunks 15-14
VMPS
administering 15-28
configuration example 15-29
configuration guidelines 15-25
default configuration 15-25
description 15-23
dynamic port membership
described 15-24
reconfirming 15-27
troubleshooting 15-29
entering server address 15-26
mapping MAC addresses to VLANs 15-24
monitoring 15-28
reconfirmation interval, changing 15-27
reconfirming membership 15-27
retry count, changing 15-28