Cisco IE 3000 Series - Page 168

Index
IN-4
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
N
Network Assistant 2-53, B-59
noise, electrical 2-4, B-7
O
operating temperature A-1
P
patch cables, MT-RJ 2-5, B-8
PC, connecting to switch 2-12 to 2-13, B-15 to B-16
physical dimensions A-2 to A-3
pinouts C-6
10/100 ports C-3
adapters C-7
console port C-9
crossover cable C-7
crossover cables
four twisted-pair, 1000BASE-T ports
C-6, C-8
two twisted-pair 10/100 ports C-5
RJ-45-to-DB-25 terminal adapter C-9
RJ-45-to-DB-9 terminal adapter C-8
SFP module C-3
straight-through cables
four twisted-pair 1000BASE-T ports
C-6, C-7
two twisted-pair C-5
port and interface troubleshooting 3-3
port connection procedures 2-36 to 2-44, B-41 to B-49
ports
10/100/1000
1-5, 1-11
100BASE-FX
LEDs
1-10
dual-purpose 1-5, 2-42 to 2-43, B-46 to B-47
See 10/100 ports, 10/100/1000 ports, 100BASE-FX
ports, 100BASE-LX ports, and console ports
POST
description
2-22, 2-53, 3-1, B-25, B-59
LEDs 3-1
results 2-22, 2-53, 3-1, B-25, B-59
running at power on 3-1
power
connecting to
AC
2-47, B-53
DC 2-16 to 2-22, B-19 to B-25
requirements A-2 to A-3
power and alarm circuits
connecting
B-36
sealed relay device B-37
power and relay connector
connecting to the switch
2-21, B-24
described 1-6
power converter
connecting the DC power clip
2-47, B-52
described 1-13
specifications A-3
power converter, connecting to
AC/DC
2-44 to 2-53, B-49 to B-59
power on 2-22, B-25
procedures
connecting to AC/DC power source
2-44 to 2-53,
B-49 to B-59
connecting to DC power 2-16 to 2-22, B-19 to B-25
installation 2-29 to 2-31, B-33 to B-35
port connection 2-36 to 2-44, B-41 to B-49
power on 2-22, B-25
R
rack-mounting, procedures 2-29 to 2-31, B-33 to B-35
rear panel, clearance 2-4, B-7
relays
connecting to power and relay connector
1-6
described 1-6
wiring 2-33 to 2-35, B-38 to B-40
removing SFP modules 2-40, B-44 to B-45