Cisco IE 3000 Series User Manual

Contents
vii
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Where to Go Next B-59
APPENDIX C Cable and Connectors C-1
Connector Specifications C-1
10/100 Ports C-1
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices C-1
Connecting to 1000BASE-T Devices C-1
100BASE-FX Ports C-3
SFP Module Ports C-3
Dual-Purpose Ports C-4
Console Port C-4
Cable and Adapter Specifications C-4
SFP Module Cable Specifications C-4
Two Twisted-Pair Cable Pinouts C-5
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports C-6
Crossover Cable and Adapter Pinouts C-7
Identifying a Crossover Cable C-7
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports C-7
Adapter Pinouts C-8
APPENDIX D Configuring the Switch with the CLI-Based Setup Program D-1
Accessing the CLI from the Console Port D-1
Entering the Initial Configuration Information D-2
IP Settings D-2
Completing the Setup Program D-2
I NDEX

Cisco IE 3000 Series Specifications

General

Series	IE 3000
Form Factor	Compact, ruggedized
Power Supply	24 VDC
Mounting	DIN rail
Management	Web-based, CLI, SNMP
Network Protocols	IEEE 802.3
MAC Address Table Size	8000
Input Voltage	24 VDC
Power Consumption	Varies by model and configuration
Dimensions	Varies by model
Weight	Varies by model
MTBF	Varies by model
PoE	Available on select models (PoE and PoE+)
Category	Industrial Ethernet Switch