Cisco IE-4010-16S12P User Manual

Environmental Ranges
65-80G at 9ms, TrapezoidalNon-Operational Shock
Physical Specifications
Without power supply: IE-4010-4S24P; 12.1 lbs (5.46 kg,
IE-4010-16S12P: 12.7 lbs (5.78 kg)
• PWR-RGD-AC-DC-H:2.55 lb (1.16 kg)
• PWR-RGD-LOW-DC-H:2.5 lb (1.13 kg)
Weight
1.75 x 17.5 x 15.0 in. (4.45 x 44.5 x 38.1 cm)Dimensions (H x W x D)
Table 16: Cisco IE 4010 Switch Power Requirements
PWR-RGD-AC-DC-H:
100 to 240 VAC, 50 to 60 Hz
100 to 250 VDC
PWR-RGD-LOW-DC-H:
24 to 60 VDC
Nominal input voltage
PWR-RGD-AC-DC-H:
85 to 265 VAC, 47 to 63 Hz
88 to 300 VDC
PWR-RGD-LOW-DC-H:
18 to 75 VDC
Absolute maximum (short term) input voltage
80WMaximum PoE power available to Powered Devices
(PD), with one power supply module installed
200WMaximum PoE power available to Powered Devices
(PD), with two power supply modules installed
Table 17: Table 15 Cisco IE 4010 Switch Power Consumption
Max Power at 60C
IE-4010-16S12PIE-4010-4S24PFRU ModeFRU Configuration
BTU/hrWattsBTU/hrWatts
2397022265RedundantWith 2 power supplies
(150W or 250W), PoE
not enabled.
Cisco IE 4010 Switch Hardware Installation Guide
78
Technical Specifications
Switch Specifications

Cisco IE-4010-16S12P Specifications

General

Brand	Cisco
Model	IE-4010-16S12P
Category	Switch
Language	English