Cisco IE-4010-16S12P User Manual

Max Power at 60C
IE-4010-16S12PIE-4010-4S24PFRU ModeFRU Configuration
BTU/hrWattsBTU/hrWatts
2226520861-NA-With 1 power supply
(150W or 250W), PoE
not enabled.
399117382112Load SharedWith 2 150W power
supplies, PoE enabled
532156535157Load SharedWith 2 250W power
supplies, PoE enabled
471138454133Load SharedWith 2 power
supplies(150W and
250W), PoE enabled
Power-Supply Module Specifications
Table 18: Power Supply Module Physical Specifications
2.55 lb (1.15 kg)
2.5 lb (1.13 kg)
Weight
PWR-RGD-AC-DC-H
PWR-RGD-LOW-DC-H
1.58 x 7 x 5 in. (4 x 17.8 x 12.7 cm) (without
mounting flanges)
1.58 x 8.15 x 5 in. (4 x 20.7 x 12.7 cm) (with
mounting flanges)
Dimensions (H x W x D)
PWR-RGD-AC-DC-H and PWR-RGD-LOW-DC-H
Alarm Ratings
Table 19: Alarm Input and Output Ratings
No external voltage needed to activate alarm inputs.
The open circuit voltage between any Alarm input (1
to 4) and Alarm input Common is 5VDC and the loop
current is 2 mA max per input.
Alarm input electrical specification
30VDC @ 1A, 48VDC @ 0.5AAlarm output electrical specification
Cisco IE 4010 Switch Hardware Installation Guide
79
Technical Specifications
Power-Supply Module Specifications

Cisco IE-4010-16S12P Specifications

General

Brand	Cisco
Model	IE-4010-16S12P
Category	Switch
Language	English