Cisco Intelligent Wireless Access Gateway User Manual

Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 2: Feature Information for the Intelligent Wireless Access Gateway
Feature InformationReleasesFeature Name
The iWAG solution offers the
following tunneling
technologies to integrate WiFi
access with the Evolved
Packet Core (EPC):
•
GPRS Tunnel Protocol
version 1 (GTPv1)
allows integration of a
3G environment, where
iWAG behaves in a way
that is similar to a
Serving GPRS Support
Node (SGSN)
connecting to a Gateway
GPRS Support Node
(GGSN).
•
Proxy Mobile IPv6
(PMIPv6) allows the
integration of a 4G
environment where
iWAG behaves as a
PMIPv6 Mobile Access
Gateway (MAG)
connecting to an Local
Mobility Anchor (LMA)
that is co-located with a
Packet Gateway (PGW),
which acts as PMIPv6
LMA.
In Cisco IOS XE Release
3.8S, this feature was
implemented on the Cisco
ASR 1000 Series Aggregation
Services Routers.
Cisco IOS XE Release 3.8SIntelligent Wireless Access
Gateway
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and
other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners. The use of the word partner
does not imply a partnership relationship between Cisco and any other company. (1110R)
Intelligent Wireless Access Gateway Configuration Guide
24 OL-30226-03
Overview of the Intelligent Wireless Access Gateway

Cisco Intelligent Wireless Access Gateway Specifications

General

Brand	Cisco
Model	Intelligent Wireless Access Gateway
Category	Gateway
Language	English