Cisco Intelligent Wireless Access Gateway - Configuration Examples for Dual-Stack GTP; Example: Configuring Dual-Stack Sessions for GTP; Example: Configuring an Interface to PGW or GGSN; Example: Configuring a Control Policy for Dual-Stack GTP

Configuration Examples for Dual-Stack GTP
Example: Configuring Dual-Stack Sessions for GTP
gtp
information-element rat-type wlan
interface local GigabitEthernet0/1/3
apn 1
apn-name example1.com
ip address ggsn 10.201.31.2
default-gw 30.1.0.1 prefix-len 16
dns-server 192.165.1.1
dhcp-lease 1801
apn 2
apn-name example2.com
ip address ggsn 10.201.31.4
default-gw 30.2.0.1 prefix-len 16
dns-server 192.165.1.1
dhcp-lease 1801
Example: Configuring an Interface to PGW or GGSN
interface GigabitEthernet0/1/3
description SGSN to GGSN port
ip address 10.201.31.1 255.255.255.0
negotiation auto
ipv6 address 2007::2/64
end
Example: Configuring a Control Policy for Dual-Stack GTP
policy-map type control BB_PMAP
class type control always event session-start
10 authorize aaa list BB_1 password cisco identifier mac-address
Example: Configuring an Access Interface for Dual-Stack GTP
interface GigabitEthernet0/0/3
ip address 21.0.0.1 255.255.0.0
ipv6 address 8001::1/16
ipv6 enable
ipv6 nd ra interval 600
service-policy type control BB_PMAP
ip subscriber l2-connected
initiator unclassified mac-address
initiator dhcp
end
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03 75
Dual Stack Support for PMIPv6 and GTP
Configuration Examples for Dual-Stack GTP