Feature Information for Dual-Stack Support for PMIPv6 and GTP
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 10: Feature Information for Dual-Stack Support for PMIPv6 and GTP
Feature InformationReleasesFeature Name
The Dual-Stack Support for
PMIPv6 feature allows both IPv4
and IPv6 traffic streams to flow
through a single PMIPv6 session.
In Cisco IOS XE Release 3.11S,
this feature was implemented on
the Cisco ASR 1000 Series
Aggregation Services Routers.
Cisco IOS XE Release 3.11Dual-Stack Support for PMIPv6
The Dual-Stack Support for GTP
feature allows both IPv4 and IPv6
traffic streams to flow through a
single GTP session.
In Cisco IOS XE Release 3.11S,
this feature was implemented on
the Cisco ASR 1000 Series
Aggregation Services Routers.
Cisco IOS XE Release 3.11Dual-Stack Support for GTP
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and
other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners. The use of the word partner
does not imply a partnership relationship between Cisco and any other company. (1110R)
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03 77
Dual Stack Support for PMIPv6 and GTP
Feature Information for Dual-Stack Support for PMIPv6 and GTP