Cisco Intelligent Wireless Access Gateway User Manual

PurposeCommand or Action
Sets AAA authentication at login.
aaa authentication login {default | list-name} { [passwd-expiry]
method1 [method2...]}
Step 6
Example:
Router(config-sg-radius)# aaa authentication login
default none
Runs authorization for all network-related service
requests.
aaa authorization network authorization-name group
server-group name
Example:
Router(config)# aaa authorization network ISG_PROXY_LIST
group AAA_SERVER_CAR
Step 7
Specifies one or more AAA authorization methods
for the Cisco ISG to provide subscriber service.
aaa authorization subscriber-service {default {cache | group |
local} | list-name} method1 [method2...]
Example:
Router(config)# aaa authorization subscriber-service
default local group AAA_SERVER_CAR
Step 8
Enables AAA accounting of requested services
for billing and security purposes when either the
RADIUS server or the TACACS+ server is used.
aaa accounting{auth-proxy| system | network | exec | connection
| commands level | dot1x} { {default | list-name } [vrf vrf-name]
{start-stop | stop-only | none} [broadcast] group group-name
Example:
Router(config)# aaa accounting network PROXY_TO_CAR
Step 9
Enables the type of actions to be performed on
accounting records.
action-type {none | start-stop | stop-only}
Example:
Router(cfg-acct-mlist)# action-type start-stop
Step 10
Specifies the AAA TACACS+ server group to use
for preauthentication.
group {tacacs+ server-group}
Example:
Router(cfg-preauth)# group AAA_SERVER_CAR
Step 11
Enables AAA accounting of requested services
for billing and security purposes when you use
aaa accounting {auth-proxy | system | network | exec | connection
| commands level | dot1x } {default |list-name } [vrf vrf-name ]
{start-stop | stop-only | none} [broadcast] group group-name
Step 12
either the RADIUS server or the TACACS+
server.
Example:
Router(config)# aaa accounting network ISG_PROXY_LIST
start-stop group AAA_SERVER_CAR
Configuring DHCP when the iWAG Acts as a DHCP Proxy
This section describes how to configure the Dynamic Host Configuration Protocol (DHCP) for the iWAG
solution when the iWAG acts as a DHCP proxy.
Intelligent Wireless Access Gateway Configuration Guide
10 OL-30226-03
Overview of the Intelligent Wireless Access Gateway
Configuring the iWAG for 3G Mobile IP Users

Cisco Intelligent Wireless Access Gateway Specifications

General

Brand	Cisco
Model	Intelligent Wireless Access Gateway
Category	Gateway
Language	English