Cisco Intelligent Wireless Access Gateway User Manual

initiator unclassified mac-address # must for roaming config
initiator dhcp
!
interface GigabitEthernet0/0/3
description To client facing interface
ip address 192.2.1.1 255.255.0.0
negotiation auto
service-policy type control ISG_GTP_CONTROL
ip subscriber l2-connected
initiator unclassified mac-address # must for roaming config
initiator dhcp
!
gtp
n3-request 3
interval t3-response 10
interval echo-request 64
information-element rat-type wlan
interface local GigabitEthernet1/3/0
apn 1200
apn-name example.com
ip address ggsn 98.0.7.13
default-gw 192.168.0.1 prefix-len 16
dns-server 192.168.255.253
dhcp-lease 3000
interface access GigabitEthernet0/0/2
interface access GigabitEthernet0/0/3
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All ReleasesCisco IOS commands
Cisco IOS Intelligent Wireless Access Gateway
Command Reference
iWAG commands
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported by this
feature.
Intelligent Wireless Access Gateway Configuration Guide
54 OL-30226-03
GTPv2 Support in the iWAG
Additional References

Cisco Intelligent Wireless Access Gateway Specifications

General

Brand	Cisco
Model	Intelligent Wireless Access Gateway
Category	Gateway
Language	English