Cisco Intelligent Wireless Access Gateway User Manual

session, it provisions a template of the policy through the system only once and references the template after
that to apply the policy on each target session. Enabling policy templates in the ISG does not impact session
SSO.
How to Configure ISG Policy Templates
By default, the ISG policy templates are disabled. The platform subscriber template command enables the
ISG policy templates.
The platform subscriber template command does not take effect until the router is reloaded. For example,
if this command is entered at the configuration prompt, policy templating remains disabled until the router
is reloaded. Similarly, if templating is enabled, the router has to be reloaded after the no subscriber template
command is entered to disable ISG policy templating.
Note
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All ReleasesCisco IOS commands
Cisco IOS Intelligent Wireless Access Gateway
Command Reference
iWAG commands
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported by this
feature.
Intelligent Wireless Access Gateway Configuration Guide
62 OL-30226-03
Configuring ISG Policy Templates
How to Configure ISG Policy Templates

Cisco Intelligent Wireless Access Gateway Specifications

General

Brand	Cisco
Model	Intelligent Wireless Access Gateway
Category	Gateway
Language	English