Cisco MX700 - Xcommand Call Unattendedtransfer; Callhistory Commands; Xcommand Callhistory Acknowledgeallmissedcalls; Xcommand Callhistory Acknowledgemissedcall

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 121
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Call UnattendedTransfer
Transfers an ongoing call to another participant. Fully supported for SIP calls only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call UnattendedTransfer CallId: CallId Num ber: "Number"
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Number: String (0, 255)
The number the call is transfered to.
CallHistory commands
xCommand CallHistory AcknowledgeAllMissedCalls
Turns off the missed calls indicator on the touch controller for all missed calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeAllMissedCalls
xCommand CallHistory AcknowledgeMissedCall
Turns off the missed calls indicator on the touch controller for the specified call.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeMissedCall CallHistoryId: Ca llHistor yId
[AcknowledgeConsecutiveDuplicates: Acknowledg eConsecutiveDuplicates]
where
CallHistoryId: Integer (1..2147483647)
CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id
number.
AcknowledgeConsecutiveDuplicates: False/True
You can include or exclude all surrounding calls with duplicate information. The default
is set to False.
xCommand CallHistory DeleteAll
Deletes all information on previous calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory DeleteAll [Filter: Filter]
where
Filter: All/Missed/Placed/Received
You can filter which calls to delete. The default is set to All.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand