Cisco MX700 - Xstatus Systemunit Notifications Notification [N] Type; Xstatus Systemunit Productid; Xstatus Systemunit Productplatform; Xstatus Systemunit Producttype

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 221
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus SystemUnit Notifications Notification [n] Type
Lists the system notification types. Notifications are issued e.g. when a system is rebooted
because of a software upgrade, or when a factory reset is performed.
FactoryResetOK: This value is returned after a successful factory reset.
FactoryResetFailed: This value is returned after a failed factory reset attempt.
SoftwareUpgradeOK: This value is returned after a successful software upgrade.
SoftwareUpgradeFailed: This value is returned after a failed software upgrade attempt.
RebootRequired: This value is returned when a reboot is required.
Other: This value is returned for any other notifications.
All the notifications can be removed from the list by issuing the xCommand SystemUnit
Notifications RemoveAll command.
Requires user role: ADMIN, USER
Value space of the result returned:
FactoryResetOK, FactoryResetFailed, SoftwareUpgradeOK, SoftwareUpgradeFailed,
RebootRequired, Other
Example:
xStatus SystemUnit Notifications Notification 1 Type
*s SystemUnit Notifications Notification 1 Type: SoftwareUpgradeOK
** end
xStatus SystemUnit ProductId
Shows the product identity.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SystemUnit ProductId
*s SystemUnit ProductId: "Cisco TelePresence Codec SX80"
** end
xStatus SystemUnit ProductPlatform
Shows the product platform.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SystemUnit ProductPlatform
*s SystemUnit ProductPlatform: "SX80"
** end
xStatus SystemUnit ProductType
Shows the product type.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SystemUnit ProductType
*s SystemUnit ProductType: "Cisco Codec"
** end
xStatus SystemUnit Software DisplayName
Shows the name of the software that is installed on the codec, as it is displayed in the UI.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SystemUnit Software DisplayName
*s SystemUnit Software DisplayName: "Display Name"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus