Cisco MX700 - Xcommand Security Certificates CA Show; Xcommand Security Certificates Services Activate; Xcommand Security Certificates Services Add; Security Commands

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 148
Cisco TelePresence MX700 and MX800
API Reference Guide
Security commands
xCommand Security Certificates CA Add
Uploads CA security certificates to this device. This is a multiline command.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates CA Add
xCommand Security Certificates CA Delete
Deletes a CA security certificate from this device.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates CA Delete Fingerprint: "Fingerprint"
where
Fingerprint: S tr in g (0..128)
The unique Identifier for the certificate that is deleted. You can get the fingerprint ID by
running xCommand Security Certificates CA Show.
xCommand Security Certificates CA Show
Shows the details for the CA security certificates on this device.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Certificates CA Show [Form at: Format]
where
Format: Literal (PEM / Text )
Specifies the format of the results. The default is set to Text.
xCommand Security Certificates Services Activate
Activates a security certificate on this device.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates Services Activate Fingerprint: "Fingerprint"
Pur pose: Purpos e
where
Fingerprint: S tr in g (0..128)
The unique Identifier for the certificate that is activated. You can get the fingerprint ID by
running xCommand Security Certificates Services Show.
Purpose: Literal (802.1X / HTTPS / Audit / SIP)
The type of service which applies to this certificate.
xCommand Security Certificates Services Add
Uploads security certificates to this device. This is a multiline command.
Requires user role: ADMIN
USAGE:
xCommand Security Certificates Services Add [PrivateKeyPassword:
"PrivateKeyPassword"]
where
PrivateKeyPassword: Str in g (0..128)
Stores the details of the private key for the password.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand