D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 170
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Video Output Monitor Gamma Set
Adjust the gamma level on the monitor.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Gamma Set Position: Position Value: Value
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
Value: 1.5/1.6/1.7/1.8/1.9/2.0/2.1/2.2/2.3/2.4/2.5/2.6/2.7
Select the level.
xCommand Video Output Monitor Reset
Reset monitor settings.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Reset Position: Position
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
xCommand Video Output Monitor Sharpness Set
Adjust the image sharpness on the monitor.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Sharpness Set Position: Position Value: Value
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
Value: Softest/Soft/Normal/Sharp/Sharpest
Select the level.
xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position: Position
where
Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight
Select one of the predefined positions.
To Next Page
Loading...
