Cisco MX700 - Xstatus Call [N] Placedonhold; Xstatus Call [N] Protocol; Xstatus Call [N] Receivecallrate; Xstatus Call [N] Remotenumber

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 185
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Call [n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the
call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
True/False
Example:
xStatus Call 27 PlacedOnHold
*s Call 27 PlacedOnHold: False
** end
xStatus Call [n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call
to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
H320/H323/SIP/Spark/Unknown
Example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
xStatus Call [n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Call 27 ReceiveCallRate
*s Call 27 ReceiveCallRate: 4000
** end
xStatus Call [n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Call 27 RemoteNumber
*s Call 27 RemoteNumber: "5585232"
** end
xStatus Call [n] Status
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/
RemotePreserved
Example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
xStatus Call [n] TransmitCallRate
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Call 27 TransmitCallRate
*s Call 27 TransmitCallRate: 768
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus