Cisco MX700 - Xstatus Audio Output Connectors Line [N] Delayms; Xstatus Audio Output Connectors Line [N] Connectionstatus; Xstatus Audio Output Localoutput [N] Channels; Xstatus Audio Output Localoutput [N] Connector [N]

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 180
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Audio Output Connectors Line [n] DelayMs
Shows the delay in milliseconds.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer (0..290)
Example:
xStatus Audio Output Connectors Line 1 DelayMs
*s Audio Output Connectors Line 1 DelayMs: 60
** end
xStatus Audio Output Connectors Line [n] ConnectionStatus
Shows whether the audio output line is connected.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Connected / NotConnected / Unknown
Example:
xStatus Audio Output Connectors Line 1 ConnectionStatus
*s Audio Output Connectors Line 1 ConnectionStatus: Connected
** end
xStatus Audio Output LocalOutput [n] Channels
States if the local output channels are mixed into into a mono signal (1) or stereo signal (2).
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output.
Requires user role: ADMIN, USER
Value space of the result returned:
1..2
Example:
xStatus Audio Output LocalOutput 4 Channels
*s Audio Output LocalOutput 4 Channels: "1"
** end
xStatus Audio Output LocalOutput [n] Connector [n]
Lists the connectors that are attached to the local output.
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Audio Output LocalOutput 4 Connector
*s Audio Output LocalOutput 4 Connector: "Line.1"
** end
xStatus Audio Output LocalOutput [n] Input [n] Gain
Shows the gain (dB) on the input, when it is connected to the local output. Range from -54 dB
to 15 dB, where -54 dB equals Off.
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output and input.
Requires user role: ADMIN, USER
Value space of the result returned:
-54..15
Example:
xStatus Audio Output LocalOutput 4 Input 2 Gain
*s Audio Output LocalOutput 4 Input 2 Gain: 0
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus