Cisco MX700 - GPIO Status; Xstatus GPIO Pin [1..4] State; H323 Status; Xstatus H323 Gatekeeper Address

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 197
Cisco TelePresence MX700 and MX800
API Reference Guide
GPIO status
xStatus GPIO Pin [1..4] State
Shows the current state of each GPIO pin. The default state is High (+12V). When activated the
state is Low (0V).
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
High/Low
Example:
xStatus GPIO Pin 1 State
*s GPIO Pin 1 State: High
** end
H323 status
xStatus H323 Gatekeeper Address
Displays the IP address of the gatekeeper where the system is registered.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end
xStatus H323 Gatekeeper Port
Shows the port which is used when connecting to on the gatekeeper.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end
xStatus H323 Gatekeeper Reason
Shows the reason for rejected registration.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Reason
*s H323 Gatekeeper Reason: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus