Cisco MX700 - Cameras Status; Xstatus Cameras Camera [N] Capabilities Options; Xstatus Cameras Camera [N] Connected; Xstatus Cameras Camera [N] Detectedconnector

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 186
Cisco TelePresence MX700 and MX800
API Reference Guide
Cameras status
xStatus Cameras Camera [n] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end
xStatus Cameras Camera [n] Connected
Shows if the camera is connected or not.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
True/False
Example:
xStatus Cameras Camera 1 Connected
*s Camera 1 Connected: True
** end
xStatus Cameras Camera [n] DetectedConnector
Shows the connector number the camera has detected it is connected to, or shows 0 if no
connection is detected.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Integer
Example:
xStatus Cameras Camera 1 DetectedConnector
*s Cameras Camera 1 DetectedConnector: 1
** end
xStatus Cameras Camera [n] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Auto/On/Off
Example:
xStatus Cameras Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
xStatus Cameras Camera [n] HardwareID
Shows the hardware identity of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 HardwareID
*s Camera 1 HardwareID: "50000000"
** end
xStatus Cameras Camera [n] MacAddress
Shows the MAC (Media Access Control) address for the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 MacAddress
*s Camera 1 MacAddress: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus