Cisco MX700 - Xstatus Video Output Connector [N] Resolution Refreshrate; Xstatus Video Output Connector [N] Resolution Width; Xstatus Video Output Connector [N] Type; Xstatus Video Output Monitor [N] Backlight

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 231
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Video Output Connector [n] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video output connector.
Requires user role: ADMIN, USER
Value space of the result returned:
1..300
Example:
xStatus Video Output Connector 1 Resolution RefreshRate
*s Video Output Connector 1 Resolution RefreshRate: 60
** end
xStatus Video Output Connector [n] Resolution Width
Shows the resolution width (in pixels) for the video output connector.
Requires user role: ADMIN, USER
Value space of the result returned:
176..4000
Example:
xStatus Video Output Connector 1 Resolution Width
*s Video Output Connector 1 Resolution Width: 1920
** end
xStatus Video Output Connector [n] Type
Shows the type of connector.
HDMI: It is an HDMI connector.
DVI: It is an DVI connector.
Requires user role: ADMIN, USER
Value space of the result returned:
HDMI/DVI
Example:
xStatus Video Output Connector 1 Type
*s Video Output Connector 1 Type: HDMI
** end
xStatus Video Output Monitor [n] Backlight
Returns the monitors backlight level, that has been set with xCommand Video Output Monitor[n]
Backlight.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Video Output Monitor 1 Backlight
*s Video Output Monitor 1 Backlight: 80
** end
xStatus Video Output Monitor [n] Brightness
Returns the monitors brightness level, that has been set with xCommand Video Output
Monitor[n] Brightness.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Video Output Monitor 1 Brightness
*s Video Output Monitor 1 Brightness: 50
** end
xStatus Video Output Monitor [n] ColorTemperature Blue
Returns the monitors level for blue, that has been set with xCommand Video Output Monitor
Color Blue Set.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Video Output Monitor 1 ColorTemperature Blue
*s Video Output Monitor 1 ColorTemperature Blue: 50
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus