Cisco Nexus 3548 - Smart Call Home Alert Groups

Cisco Nexus switches support the following predefined destination profiles:
• CiscoTAC-1—Supports the Cisco-TAC alert group in XML message format.
• full-text-destination—Supports the full text message format.
• short-text-destination—Supports the short text message format.
Smart Call Home Alert Groups
An alert group is a predefined subset of Smart Call Home alerts that are supported in all Cisco Nexus devices.
Alert groups allow you to select the set of Smart Call Home alerts that you want to send to a predefined or
custom destination profile. The switch sends Smart Call Home alerts to e-mail destinations in a destination
profile only if that Smart Call Home alert belongs to one of the alert groups associated with that destination
profile and if the alert has a Smart Call Home message severity at or above the message severity set in the
destination profile.
The following table lists the supported alert groups and the default CLI command output included in Smart
Call Home messages generated for the alert group.
Table 17: Alert Groups and Executed Commands
Executed CommandsDescriptionAlert Group
Execute commands based on the
alert group that originates the alert.
All critical alerts from the other
alert groups destined for Smart Call
Home.
Cisco-TAC
show diagnostic result module all
detail
show moduleshow version
show tech-support platform
callhome
Events generated by diagnostics.Diagnostic
show diagnostic result module all
detail
show moduleshow version
show tech-support platform
callhome
Events related to supervisor
modules.
Supervisor hardware
show diagnostic result module all
detail
show moduleshow version
show tech-support platform
callhome
Events related to standard or
intelligent switching modules.
Linecard hardware
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
85
Configuring Smart Call Home
Smart Call Home Alert Groups