Displaying SPAN Information
Procedure
PurposeCommand or Action
Displays the SPAN configuration.
switch# show monitor [session {all | session-number |
range session-range} [brief]]
Step 1
The following example shows how to display SPAN session information:
switch# show monitor
SESSION STATE REASON DESCRIPTION
------- ----------- ---------------------- --------------------------------
2 up The session is up
3 down Session suspended
4 down No hardware resource
The following example shows how to display SPAN session details:
switch# show monitor session 2
session 2
---------------
type : local
state : up
source intf :
source VLANs :
rx :
destination ports : Eth3/1
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
153
Configuring SPAN
Displaying SPAN Information
To Next Page
Loading...
