Cisco Nexus 3548 - Creating a Destination Profile

PurposeCommand or Action
The customer-number can be up to 255 alphanumeric
characters.
(Optional)
Configures the site number for this switch.
switch(config-callhome)# site-id
site-number
Step 9
The site-number can be up to 255 alphanumeric characters in
free format.
(Optional)
Configures the switch priority for this switch.
switch(config-callhome)#
switch-priority number
Step 10
The range is from 0 to 7, with 0 being the highest priority and
7 the lowest. The default is 7.
Switch priority is used by the operations personnel
or TAC support personnel to decide which Call
Home message should be responded to first. You
can prioritize Call Home alerts of the same severity
from each switch.
Note
(Optional)
Displays a summary of the Smart Call Home configuration.
switch# show callhome
Step 11
(Optional)
Saves the change persistently through reboots and restarts by
copying the running configuration to the startup configuration.
switch(config)# copy
running-config startup-config
Step 12
The following example shows how to configure the contact information for Call Home:
switch# configuration terminal
switch(config)# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact personname@companyname.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# street-address 123 Anystreet St., Anycity, Anywhere
What to Do Next
Create a destination profile.
Creating a Destination Profile
You must create a user-defined destination profile and configure the message format for that new destination
profile.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
95
Configuring Smart Call Home
Creating a Destination Profile