Cisco Nexus 3548 - Configuring the Scheduler; Information about the Scheduler

CHAPTER 6
Configuring the Scheduler
This chapter contains the following sections:
•
Information About the Scheduler, page 35
•
Licensing Requirements for the Scheduler, page 36
•
Guidelines and Limitations for the Scheduler, page 36
•
Default Settings for the Scheduler, page 37
•
Configuring the Scheduler, page 37
•
Verifying the Scheduler Configuration, page 43
•
Configuration Examples for the Scheduler, page 43
•
Standards for the Scheduler, page 45
Information About the Scheduler
The scheduler allows you to define and set a timetable for maintenance activities such as the following:
•
Quality of service policy changes
•
Data backup
•
Saving a configuration
Jobs consist of a single command or multiple commands that define routine activities. Jobs can be scheduled
one time or at periodic intervals.
The scheduler defines a job and its timetable as follows:
Job
A routine task or tasks defined as a command list and completed according to a specified schedule.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
35