Cisco Nexus 5500 Series - Page 146

1140
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter P Commands
provision
provision
To preprovision a module in a chassis slot, use the provision command. To remove a preprovisioned
module from a slot, use the no form of this command.
provision model model-name
no provision model [model-name]
Syntax Description
Command Default None
Command Modes Slot configuration mode
Switch profile configuration mode
model Specifies the type of module to be provisioned.
model-name Module name. The supported modules are as follows:
• N2K-C2148T—Cisco Nexus 2000 Series Fabric Extender 48x1G
4x10G Module
• N2K-C2232P—Cisco Nexus 2000 Series Fabric Extender 32x10G
Module
• N2K-C2232TM—Cisco Nexus 2000 Series Fabric Extender 32x10G
Module
• N2K-C2248T—Cisco Nexus 2000 Series Fabric Extender 48x1G
4x10G Module
• N2K-N2224TP—Cisco Nexus 2000 Series Fabric Extender 24x1G
2x10G SFP+ Module
• N55-M16FP—Cisco 16 port Port Fiber Channel Expansion Module
16 x SFP
• N55-M16P—Cisco 16x10-Gigabit Ethernet Expansion Module
• N55-M16UP—Cisco 16x10-Gigabit Flexible Ethernet Expansion
Module
• N55-M8P8FP—Cisco 8 Port 1/2/4/8-Gigabit Fibre Channel + 8 Port
10-Gigabit Ethernet Expansion Module
• N5K-M1008—Cisco 8 Port Fiber Channel Expansion Module 8 x SFP
• N5K-M1060—Cisco 6 Port Fiber Channel Expansion Module 6 x SFP
• N5K-M1404—Expansion Module 4 x 10GBase-T LAN, 4 x Fiber
Channel
• N5K-M1600—Cisco 6-port 10 Gigabit Ethernet SFP Module 6 x SFP