Cisco Nexus 5500 Series - Show Mvr

1330
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show mvr
show mvr
To display information about Multicast VLAN Registration (MVR), use the show mvr command.
show mvr
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about MVRs:
switch# show mvr
MVR Status : enabled
Global MVR VLAN : 5
Number of MVR VLANs : 1
switch#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
mvr group Configures an MVR group for an interface.
mvr type Configures an MVR port type for an interface.
mvr vlan Configures an MVR VLAN for an interface.
show mvr groups Displays the MVR groups.
show mvr members Displays the active MVR groups.