Cisco Nexus 5500 Series - Page 148

1142
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter P Commands
provision
switch(config-slot)# no provision model N5K-M1404
switch(config-slot)#
This example shows how to remove all preprovisioned modules or line cards from a chassis slot:
switch(config)# slot 2
switch(config-slot)# no provision model
switch(config-slot)#
Related Commands Command Description
show module Displays module information.
show provision Displays provisioned modules.
show switch-profile Displays switch profile information.
show running-config
exclude-provision
Displays the running configuration excluding the preprovisioned features.
slot Enables a slot for preprovisioning a module.
switch-profile Configures a switch profile.