Cisco Nexus 5500 Series - Page 270

1264
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show cdp all
show cdp all
To display the interfaces in the Cisco Discovery Protocol (CDP) database, use the show cdp all
command.
show cdp all
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the interfaces in the CDP database:
switch# show cdp all
mgmt0 is up
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/1 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/2 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/3 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/4 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/5 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
Ethernet1/6 is down
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 180 seconds
<--Output truncated-->
switch#
Release Modification
5.2(1)N1(1) This command was introduced.