Cisco Nexus 5500 Series - Page 305

1299
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show interface status err-disabled
show interface status err-disabled
To display the error disabled state of interfaces, use the show interface status err-disabled command.
show interface status err-disabled
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the error disabled state of interfaces:
switch# show interface status err-disabled
-----------------------------------------------------------------------
Port Name Status Reason
-----------------------------------------------------------------------
Eth114/1/27 -- down BPDUGuard errDisable
Eth114/1/28 -- down BPDUGuard errDisable
Eth114/1/29 -- down BPDUGuard errDisable
Eth114/1/30 -- down BPDUGuard errDisable
Eth114/1/31 -- down BPDUGuard errDisable
Eth114/1/32 -- down BPDUGuard errDisable
Eth114/1/33 -- down BPDUGuard errDisable
Eth114/1/34 -- down BPDUGuard errDisable
Eth114/1/35 -- down BPDUGuard errDisable
Eth114/1/36 -- down BPDUGuard errDisable
Eth114/1/39 -- down BPDUGuard errDisable
Eth114/1/40 -- down BPDUGuard errDisable
Eth114/1/41 -- down BPDUGuard errDisable
Eth114/1/42 -- down BPDUGuard errDisable
Eth114/1/43 -- down BPDUGuard errDisable
Eth114/1/44 -- down BPDUGuard errDisable
Eth114/1/45 -- down BPDUGuard errDisable
Eth114/1/46 -- down BPDUGuard errDisable
Eth114/1/47 -- down BPDUGuard errDisable
--More--
switch#
Release Modification
5.2(1)N1(1) This command was introduced.