1306
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show interface switchport backup
port-channel300 port-channel301 Active Up/Backup Down
Preemption Mode : forced
Preemption Delay : 35 seconds (default)
Multicast Fast Convergence : On
Bandwidth : 20000000 Kbit (port-channel300), 10000000 Kbit (port-channel
301)
port-channel500 port-channel501 Active Down/Backup Down
Preemption Mode : off
Multicast Fast Convergence : On
Bandwidth : 100000 Kbit (port-channel500), 100000 Kbit (port-channel501)
port-channel502 port-channel503 Active Down/Backup Down
Preemption Mode : off
Multicast Fast Convergence : Off
Bandwidth : 100000 Kbit (port-channel502), 100000 Kbit (port-channel503)
port-channel504 Ethernet2/1 Active Down/Backup Down
Preemption Mode : off
Multicast Fast Convergence : Off
Bandwidth : 100000 Kbit (port-channel504), 0 Kbit (Ethernet2/1)
switch#
Table 2 describes the significant fields displayed in the output.
Related Commands
Table 2 show interface switchport backup Field Descriptions
Field Description
Active Interface Layer 2 interface being configured.
Backup Interface Layer 2 interface to act as a backup link to the
interface being configured.
State Flex Links status.
Preemption Mode Preemption scheme for a backup interface pair.
Preemption Delay Preemption delay configured for a backup
interface pair.
Multicast Fast Convergence Fast convergence configured on the backup
interface.
Bandwidth Bandwidth configured on the backup interface.
Command Description
switchport backup
interface
Configures Flex Links.
show running-config
backup
Displays the running configuration information for backup interfaces.
show running-config
flexlink
Displays the running configuration information for Flex Links.