Cisco Nexus 5500 Series - Page 330

1324
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show mac address-table notification
show mac address-table notification
To display notifications about the MAC address table, use the show mac address-table notification
command.
show mac address-table notification {mac-move | threshold}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display MAC address move notifications:
switch# show mac address-table notification mac-move
MAC Move Notify : disabled
switch#
Related Commands
mac-move Displays notification messages about MAC addresses that were moved.
threshold Displays notification messages sent when the MAC address table threshold
was exceeded.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show mac
address-table
Displays information about the MAC address table.