Cisco Nexus 5500 Series - Page 407

1401
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show startup-config port-security
show startup-config port-security
To display the secure ports configuration information in the startup configuration file, use the show
startup-config port-security command.
show startup-config port-security [all]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the information from the startup configuration file for all secure
ports configured on an interface:
switch# show startup-config port-security
Related Commands
all (Optional) Displays detailed information about secure ports, including
default settings.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
clear port-security
dynamic
Clears the dynamically secured addresses on a port.