Cisco Nexus 5500 Series - Page 416

1410
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show tech-support port-channel
show tech-support port-channel
To display troubleshooting information about EtherChannel interfaces, use the show tech-support
port-channel command.
show tech-support port-channel
Syntax Description This command has no arguments and keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines The output from the show tech-support port-channel command is very long. To better manage this
output, you can redirect the output to a file.
Examples This example shows how to display Cisco technical support information for EtherChannel interfaces:
switch# show tech-support port-channel
`show port-channel internal event-history all`
Low Priority Pending queue: len(0), max len(2) [Thu Jul 8 04:05:04 2010]
High Priority Pending queue: len(0), max len(32) [Thu Jul 8 04:05:04 2010]
PCM Control Block info:
pcm_max_channels : 4096
pcm_max_channel_in_use : 1912
pc count : 29
hif-pc count : 20
Max PC Cnt : 768
====================================================
PORT CHANNELS:
port-channel19
channel : 19
bundle : 65535
ifindex : 0x16000012
admin mode : active
oper mode : active
fop ifindex : 0x1fc605c0
nports : 4
active : 4
pre cfg : 0
ltl: : 0
lif: : 0
iod: : 43
global id : 1
Release Modification
5.2(1)N1(1) This command was introduced.