Cisco Nexus 9348GC-FXP NX-OS User Manual

CHAPTER 1
Overview
The Cisco Nexus 9348GC-FXP switch (N9K-C9348GC-FXP) is a 1-RU fixed-port, L2/L3 switch, designed
for deployment in data centers. This switch has 48 100/1000-Megabit 1GBASE-T downlink ports, 4
10-/25-Gigabit SFP28 downlink ports, and 2 40-/100-Gigabit QSFP28 uplink ports. The chassis for this
switch includes the following user-replaceable components:
•
Fan modules (three) with the following airflow choices:
◦
Port-side intake airflow with burgundy coloring (NXA-FAN-30CFM-B)
◦
Port-side exhaust airflow with blue coloring (NXA-FAN-30CFM-F)
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
choices (do not mix AC and DC power sources and do not mix airflow directions):
◦
350-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-350W-PI)
◦
350-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-350W-PE)
The following figure shows the hardware features seen from the port side of the chassis.
Cisco Nexus 9348GC-FXP NX-OS Mode Hardware Installation Guide
1

Cisco Nexus 9348GC-FXP NX-OS Specifications

General

Product Model	Nexus 9348GC-FXP
Switch Type	Fixed
Form Factor	1 RU
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Operating System	Cisco NX-OS
Memory	16 GB
Flash Memory	16 GB
VLANs	4096
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-40 to 158°F (-40 to 70°C)
Humidity	5 to 95% noncondensing
Layer Support	Layer 2, Layer 3
Power Supply	Dual hot-swappable power supplies
Buffer Size	12 MB
Input Voltage	100-240 VAC
Dimensions (H x W x D)	1.72 x 17.3 x 18.1 in (4.4 x 43.9 x 46.0 cm)
DC Power Input	-40 to -72 VDC
Ports	48 x 1/10/25-Gbps and 4 x 40/100-Gbps