Cisco Nexus 9348GC-FXP NX-OS - Power Specifications; 350-W AC Power Supply Specifications

Some power supplies might have UL listed capabilities that are greater than the maximum power
requirements for a switch. To determine the power consumption characteristics for the switch, use the
typical and maximum requirements listed in the following table.
Note
Maximum Power
Consumption (AC or
DC)
Typical Power Consumption (AC or DC)Switch
287 W178 WCisco Nexus 9348GC-FXP
Power Specifications
Power specifications include the specifications for each type of power supply module.
350-W AC Power Supply Specifications
These specifications apply to the following power supplies:
•
NXA-PAC-350W-PE
•
NXA-PAC-350W-PI
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132 VAC, 180-264 VAC)AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
7.6 A at 100 VAC
3.65 A at 208 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
350 WMaximum output power per power
supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 350 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
Cisco Nexus 9348GC-FXP NX-OS Mode Hardware Installation Guide
43
System Specifications
Power Specifications