Cisco PenTeleData 8800 Series Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
121
• If Provide Shared Credentials is checked, then the specified Username and Password will be utilized for all Cisco IP
Phone 8861 and 8865 that utilize this Wireless LAN Profile.
• Up to 64 characters can be entered for the Username and Password.
• A Password Description can optionally be entered.
• If EAP-TLS is selected then User Certificate must be configured to specify the type of user certificate to utilize for
EAP-TLS authentication.
• Can set User Certificate to MIC (Manufacturing Installed Certificate) or User Installed.
• If PSK is selected to utilize Pre-Shared Key authentication, then a PSK Passphrase must be entered.
• The PSK Passphrase must be in one of the following formats:
• 8-63 ASCII character string
• 64 HEX character string
• A Password Description can optionally be entered.
• If WEP is selected to utilize static WEP (Wired Equivalent Privacy) authentication, then a WEP Key must be entered.
• Only WEP key 1 is supported, so need to ensure that the entered key matches transmit key on the access point side.
• The WEP Key must be in one of the following formats:
• 40/64 Bit Key = 5 digit ASCII or 10 digit HEX character string
• 104/128 Bit Key = 13 digit ASCII or 26 digit HEX character string
• A Password Description can optionally be entered.

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English