Figure 14.6: The CDP Management page allows you to choose which ports you want defined for CDP.
SPAN—The SPAN Configuration and Port Monitoring page. Here you have the option of selecting
the port to which you want to send the captured frames and the ports to be monitored. See Figure
14.7.
•
Figure 14.7: This page allows you to configure which ports to monitor and where they are monitored from.
CONSOLE—The Console and Upgrade Configuration page. As you can see in Figure 14.8, this page
is self explanatory. However, we wanted to bring to your attention the Accept Upgrade Transfer From
Other Hosts option; it may be a vulnerability if you leave it selected.
•
279
To Next Page
Loading...
