Administration: System Logs
Viewing Memory Logs
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 41
3
Viewing Flash Memory Logs
The Flash Memory page displays the messages that are stored in flash memory in
chronological order. The minimum severity for logging is configured on the Log
Settings page. Flash logs remain when the switch is rebooted. You can clear the
logs manually.
To view flash logs:
STEP 1 Click Status and Statistics > View Log > Flash Memory.
The following fields are displayed:
• Log Index—Log entry number.
• Log Time—Time when message was generated.
• Severity—Event severity.
• Description—Message text describing the event.
STEP 2 Click Clear Logs to clear the log messages.
To Next Page
Loading...
