Cisco SF220-24P - Chapter 19: SNMP; SNMP Versions and Workflow

19
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 272
SNMP
This chapter describes the Simple Network Management Protocol (SNMP) feature
that provides a method for managing network devices.
It includes the following topics:
• SNMP Versions and Workflow
• Supported MIBs
• Model Object IDs
• Configuring SNMP Engine ID
• Configuring SNMP Views
• Configuring SNMP Groups
• Managing SNMP Users
• Configuring SNMP Communities
• Configuring SNMP Notification Recipients
SNMP Versions and Workflow
The Cisco 220 switch functions as an SNMP agent and supports SNMP v1, v2, and
v3. It also reports system events to trap receivers using the traps defined in the
Management Information Base (MIB) that it supports.
SNMP v1 and v2
To control access to the system, a list of SNMP communities are defined. Each
community consists of a community string and its access privilege. The system
responds only to SNMP messages specifying the community that has the correct
permissions and correct operations.