Name: Cisco SF350-24P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 160

Port Management

This section describes port configuration, link aggregation, and the Green Ethernet feature.

It covers the following topics:

•Workflow

• Port Settings

• Error Recovery Settings

• Loopback Detection Settings

• Link Aggregation

• UDLD

•PoE

• Green Ethernet

Workflow

To configure ports, perform the following actions:

1. Configure port by using the Port Settings page.

2. Enable/disable the Link Aggregation Control (LAG) protocol, and configure the potential

member ports to the desired LAGs by using the LAG Management page. By default, all

LAGs are empty.

3. Configure the Ethernet parameters, such as speed and auto-negotiation for the LAGs by

using the LAG Settings page.

4. Configure the LACP parameters for the ports that are members or candidates of a dynamic

LAG by using the LACP page.

5. Configure Green Ethernet and 802.3 Energy Efficient Ethernet by using the Properties page.

Other manuals for Cisco SF350-24P

Questions and Answers:

Need help?

Do you have a question about the Cisco SF350-24P and is the answer not in the manual?

General