Cisco SF350-24P Administration Guide

11
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 193
Smartport
This document describes the Smartports feature.
It contains the following topics:
•Overview
• How the Smartport Feature Works
• Auto Smartport
• Error Handling
• Default Configuration
• Relationships with Other Features
• Common Smartport Tasks
• Configuring Smartport Using The Web-based Interface
• Built-in Smartport Macros
Overview
The Smartport feature is designed to provide a means of quickly configuring network devices,
such as IP phones, printers, routers and Access Points (APs).
Using this feature, you create a “Smartport” macro, which is simply a script containing CLI
commands. These CLI commands specify the device configuration. After creating a Smartport
macro, it is applied to one or more devices. The result is that these devices share a common
configuration.
The Smartport feature works in conjunction with other features such as:
• Voice VLAN and Smartport, described in the Voice VLAN section.

Cisco SF350-24P Specifications

General

Model	SF350-24P
Category	Switch
PoE Budget	195W
Layer	Layer 3
Power Supply	Internal
Uplink Ports	2 x combo Gigabit SFP + 2 x Gigabit
MAC Address Table Size	16K entries
Jumbo Frame Support	9216 bytes
Management	Web, CLI, SNMP
Features	QoS, VLAN, IPv6, ACLs
Dimensions	440 mm x 257 mm x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Weight	3.48 kg