Cisco SF350-24P Administration Guide

Smartport
Overview
194 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
11
• LLDP/CDP for Smartport, described in the Discover - LLDP and Discovery - CDP
sections, respectively.
Additionally, typical work flows are described in the Common Smartport Tasks section.
What is a Smartport
A Smartport is an interface (port, VLAN or LAG) to which a built-in (or user-defined) macro
may be applied. Smartport types refers to the types of devices, which can be attached to
Smartports.
The MTS device supports the following Smartport types (named to describe the type of device
that is attached to the interface):
• Printer
• Desktop
• Guest
• Server
• Host
• IP Camera
• IP phone
• IP Phone+Desktop
• Switch
• Router
• Wireless Access Point
Each Smartport type is associated with two Smartport macros.
• The “macro” serves to apply the desired configuration
• The “anti-macro” serves to undo all configuration performed by the macro when an
interface is attached to a different Smartport type.

Cisco SF350-24P Specifications

General

Model	SF350-24P
Category	Switch
PoE Budget	195W
Layer	Layer 3
Power Supply	Internal
Uplink Ports	2 x combo Gigabit SFP + 2 x Gigabit
MAC Address Table Size	16K entries
Jumbo Frame Support	9216 bytes
Management	Web, CLI, SNMP
Features	QoS, VLAN, IPv6, ACLs
Dimensions	440 mm x 257 mm x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Weight	3.48 kg