Cisco SF350-24P Administration Guide

Multicast
Unregistered Multicast
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 285
15
To define unregistered Multicast settings:
STEP 1 Click Multicast > Unregistered Multicast.
STEP 2 Select the Interface Type equals to— To view either ports or LAGs.
STEP 3 Click Go.
STEP 4 Define the following:
• Port/LAG—Displays the port or LAG ID.
• Displays the forwarding status of the selected interface. The possible values are:
- Forwarding—Enables forwarding of unregistered Multicast frames to the selected
interface.
- Filtering—Enables filtering (rejecting) of unregistered Multicast frames to the
selected interface.
STEP 5 Click Apply. The settings are saved, and the Running Configuration file is updated.

Cisco SF350-24P Specifications

General

Model	SF350-24P
Category	Switch
PoE Budget	195W
Layer	Layer 3
Power Supply	Internal
Uplink Ports	2 x combo Gigabit SFP + 2 x Gigabit
MAC Address Table Size	16K entries
Jumbo Frame Support	9216 bytes
Management	Web, CLI, SNMP
Features	QoS, VLAN, IPv6, ACLs
Dimensions	440 mm x 257 mm x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Weight	3.48 kg