ExampleDescriptionPrompt
example.comCannot be an IP address. Valid
characters include ASCII characters,
any numerals, the hyphen (-), and the
period (.).
DNS domain name
10.15.20.25Must be a valid IPv4 address for the
primary name server.
Primary name server
(Optional) Allows you to configure
multiple name servers. To do so,
enter y to continue.
Must be a valid IPv4 address for the
primary name server.
Add/Edit another name server
clock.nist.govMust be a valid IPv4 address or
hostname of a Network Time Protocol
(NTP) server.
Primary NTP server
(Optional) Allows you to configure
multiple NTP servers. To do so, enter y
to continue.
Must be a valid NTP domain.Add/Edit another NTP server
UTC (default)Must be a valid time zone. For
example, for Pacific Standard Time
(PST), the System Time Zone is
PST8PDT (or Coordinated Universal
Time (UTC) minus 8 hours).
Ensure that the system time
and time zone match with
the CIMC or Hypervisor
Host OS time and time zone.
System performance might
be affected if there is any
mismatch between the time
zones.
Note
You can run the show timezones
command from the Cisco ISE CLI for
a complete list of supported time zones.
We recommend that you set
all the Cisco ISE nodes to
the UTC time zone. This
time zone setting ensures
that the reports, logs, and
posture agent log files from
the various nodes in your
deployment are always
synchronized with regard to
the time stamps.
Note
System Time Zone
Install Cisco ISE Software on Cisco SNS Appliances
34
Install Cisco ISE Software on Cisco SNS Appliances
Run the Setup Program
To Next Page
Loading...
