3-5
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
78-13154-01
Chapter 3 Installing the VG248
Installing the VG248
Putting the VG248 in a Rack
After the brackets are secured to the chassis, you can rack-mount it (Figure 3-3).
Figure 3-3 Mounting the VG248 in a Rack
Step 1 Lift the VG248 and align the mounting holes in the L brackets with the mounting
holes in the rack.
Step 2 Secure the chassis by inserting the mounting screws through the holes in the
L brackets and into the threaded holes in the mounting posts.
58936
To Next Page
Loading...
Need help?
General