v
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Contents
Setting the Host Name 2-7
Setting the IP Address 2-7
Setting the Subnet Mask 2-8
Setting the Default Router 2-8
Setting the DNS Server 2-9
Setting the Domain Name 2-9
Enabling CDP 2-10
Setting DSCP Quality of Service Values 2-10
Configuring Passwords 2-11
Configuring the Login Password 2-11
Configuring the Enable Password 2-12
Configuring SNMP Settings 2-12
Setting Community Strings 2-12
Configuring Contact Information 2-13
Configuring Contact Name 2-13
Configuring System Name 2-14
Configuring Location 2-14
Configuring Trap Settings 2-14
Enabling Authentication Traps 2-15
Configuring Trap Receiver Stations 2-15
Configuring the Telephony Settings on the VG248 3-1
Identifying the Cisco CallManager TFTP Server 3-2
Changing the Cisco CallManager Device Name 3-2
Disabling Cisco Fax Relay 3-3
Reverting to Previous Configuration 3-3
Choosing the Call Control Mode 3-4
Assigning Feature Codes 3-4
To Next Page
Loading...
Need help?
General